DIJET : EZSM
EZ Drill for heat-resistant Alloys
- ●Tool Material：Carbide
- ●Helix Angle：30°
- ●Drilling depth：3xφDc
- ●with coolant hole
- ・For general steel, stainless steel, cast iron, and heat-resistance ally
- ・Reduced 30% power consumption
Recommended cutting conditions for EZSM type
| Work material | Ni-based heat-resistant alloy 30 - 42HRC |
Titanium alloy 30 - 42HRC |
||
| Drill Dia.(mm) | Vc(m/min) | f(mm/rev) | f(mm/rev) | f(mm/rev) |
| φ3.0-6.0 | 10 (10-25) |
0.06 (0.06-0.10) |
20 (20-60) |
0.10 (0.06-0.14) |
| φ6.1-10.0 | 14 (10-25) |
0.08 (0.06-0.10) |
40 (20-60) |
0.15 (0.10-0.20) |
| φ10.1-12.0 | 14 (10-25) |
0.10 (0.08-0.12) |
40 (20-60) |
0.20 (0.14-0.26) |
