NACHI:Carbide Drills

★:A part of the product is stock of specified distributor.

NA_AQDEXZ-HCD_2.pngNA_AQDEXZ-HCD_2.png

AQDEXZ-HCD

AQUA Drills EX FLAT
Machine screw counter bore
Step drill for drilling countersunk filter screw holes

NA_AQDEXZ-SCD_2.pngNA_AQDEXZ-SCD_2.png

AQDEXZ-SCD

AQUA Drills EX FLAT
Machine screw counter sink
Step drill for drilling countersunk flat screw holes

NA_AQDEXZ-RCD_2.pngNA_AQDEXZ-RCD_2.png

AQDEXZ-RCD

AQUA Drills EX FLAT
Counter bore for hexagon socket head bolts
Step drill for drilling countersunk slotted hex bolt holes

NA_AQDEX-HCD_2.pngNA_AQDEX-HCD_2.png

AQDEX-HCD

AQUA Drills EX
Machine screw counter bore
Step drill for drilling countersunk filter screw holes

NA_AQDEX-SCD_2.pngNA_AQDEX-SCD_2.png

AQDEX-SCD

AQUA Drills EX
Machine screw counter sink
Step drill for drilling countersunk flat screw holes

NA_AQDEX-RCD_2.pngNA_AQDEX-RCD_2.png

AQDEX-RCD

AQUA Drills EX
Counter bore for hexagon socket head bolts
Step drill for drilling countersunk slotted hex bolt holes

AQDEXE.pngAQDEXE.png

AQDEXE

AQUA Drills EX Extension
This drill is suitable for drilling of deep holes.

AQDEXSL.pngAQDEXSL.png

AQDEXSL

AQUA Drill EX Semi-Long
This drill provides reliable high performance for drilling deep holes in materials ranging from carbon steels to very hard steels.

DCD.pngDCD.png

DCD

Diamond Coated Drills
This drill coated 100% pure diamond is most suitable for long life drilling of aluminum alloy, high silicon aluminum alloy and FRP.

DFFD.pngDFFD.png

DFFD

Diamond Coated FF Drills
This drill coated 100% pure diamond is most suitable for Aluminum. High precision drilling is possible.

DCDCF.pngDCDCF.png

DCDCF

Crystal Dia Coated Drills for CFRP
Diamond coated drills give great performance for drilling in CFRP.

AQDEXRN.pngAQDEXRN.png

AQDEXRN

AQUA Drills EX for Heat-Resistant Alloy
This drill has both wear and chipping resistance for heat resistant alloys that are difficult to handle.

AQD3F.pngAQD3F.png

AQD3F

AQUA Drill 3 Flute
This drill having balanced 3 flutes is suitable for precision drilling without reaming.

AQDED3F.pngAQDED3F.png

AQDED3F

AQUA Drill 3 Flute With End Cutting Teeth
Excellent position correction, high-grade work especially with cast holes and boring.

AQDH.pngAQDH.png

AQDH

AQUA Drill Hard
This drill meets high efficiency drilling of hardened material.(50~68HRC)

OIL-Hole

AQDEXOH35-50D.pngAQDEXOH35-50D.png

AQDEXOH35D

AQUA Drills EX Oil-Hole 35D
High performance up to 35x drill diameter.

AQDEXOH35-50D.pngAQDEXOH35-50D.png

AQDEXOH40D

AQUA Drills EX Oil-Hole 40D
High performance up to 40x drill diameter.

AQDEXOH35-50D.pngAQDEXOH35-50D.png

AQDEXOH45D

AQUA Drills EX Oil-Hole 45D
High performance up to 45x drill diameter.

AQDEXOH35-50D.pngAQDEXOH35-50D.png

AQDEXOH50D

AQUA Drills EX Oil-Hole 50D
High performance up to 50x drill diameter.

AQDEXOH3F3D.pngAQDEXOH3F3D.png

AQDEXOH3F3D

AQUA Drills EX Oil-Hole 3 Flutes 3D
Superior balance of three cutting edges is excellent for high-precision drilling.
High performance drilling up to 3x drill diameter is possible.

MQLPLD.pngMQLPLD.png

MQLPLD

MQL Power Long Drill
This drill meets non-step drilling of deep holes up to 20 times of a diameter.

PLOH3D.pngPLOH3D.png

PLOH3D

PLATINA Oile-Hole Drill 3D
This oil-hole drill is suitable for most workpiece materials from raw materials to hardened materials.

PLOH5D.pngPLOH5D.png

PLOH5D

PLATINA Oile-Hole Drill 5D
This oil-hole drill is suitable for most workpiece materials from raw materials to hardened materials.

PLOH7D.pngPLOH7D.png

PLOH7D

PLATINA Oile-Hole Drill 7D
This oil-hole drill is suitable for most workpiece materials from raw materials to hardened materials.

Flat Drills

AQDEXZOHPLT.png

AQDEXZOHPLT

AQUA Drills EX FLAT Oil-Hole Pilot
For guide hole drilling on sloped surfaces.

AQDEXZ.pngAQDEXZ.png

AQDEXZ

AQUA Drill EX FLAT
Drill for counter boring has excellent performance. Superior for drilling on angled surfaces and tap drill holes.

AQDEXZR.pngAQDEXZR.png

AQDEXZR

AQUA Drill EX FLAT Regular
Flat type drill bits have great performance drilling holes to 4X diameter. A centering hole or guide hole is necessary.

DLCZR.pngDLCZR.png

DLCZR

DLC Drill Flat Regular
High efficiency drilling of Aluminum Alloy is available.

DLCDZ3F.pngDLCDZ3F.png

DLCDZ3F

DLC Drill Flat 3-Flutes
High efficiency drilling of Aluminum Alloy is available.

DLCDZLS.png

DLCDZLS

DLC Drills Flat Long Shank
Flat type drill bits have great performance drilling holes to 10x diameter underhead length

DLCDZOH5D.png

DLCDZOH5D

DLC Drills Flat Oil-Hole 5D Type
High performance flat drilling up to 5x drill diameter is possible.