NACHI:Carbide End Mills

2DCE.png2DCE.png

2DCE

Diamond Coated End Mills Two Flutes
This is the best end mill for graphite electrodes. The life is over 10 times of conventional carbide end mill.

2DSE.png2DSE.png

2DSE

Diamond Coated Dtub End Mills
This is the best end mill for Aluminum Alloys and High Si Aluminum Alloys.

CU2.pngCU2.png

CU2

Four Flutes End Mill for Copper
This end Mills is the best for the copper electrode milling.

CU4.pngCU4.png

CU4

Two Flutes End Mill for Copper
This end Mills is the best for the copper electrode milling.

2PLXS.png2PLXS.png

2PLXS

X's-mill Two Flute
This end mill is workpiece materials from raw materials to hardened materials.

SL2PLXS.pngSL2PLXS.png

SL2PLXS

X's-mill Long Two Flute
This end mill having long flute is suited for high-speed and long life milling, and used in deep grooving.

4PLXS.png4PLXS.png

4PLXS

X's-mill Four Flutes
This end mill is suitable for high-speed and long life milling of workpiece materials from raw materials to hardened materials.

SL4PLXS.pngSL4PLXS.png

SL4PLXS

X's-mill Long Four Flutes
This end mill having long flute is suited for high-speed and long life milling, and is used in long side milling.

for CFRP

DCECFF.pngDCECFF.png

DCECFF

Crystal Diamond Coated Fiber Mill
Excellent for milling The Sides of CFRP materials.

Variable Lead

GSXVL4XT-2DGSXVL4XT-2D

GSXVL4XT-2D

GSX MILL VL 2D for Extreme chuck for Ti・SUS
Realize high efficient milling by using special shank to suppress chattering and to prevent tools from falling out.

GSXVL4XT-4DGSXVL4XT-4D

GSXVL4XT-4D

GSX MILL VL 4D for Extreme chuck for Ti・SUS
Realize high efficient milling by using special shank to suppress chattering and to prevent tools from falling out.

GSXVLSLT3-2.5DGSXVLSLT3-2.5D

GSXVLSLT3-2.5D

GSX MILL VL SLOT 2.5D
This end mill suppresses chatter vibration. It is available for grooving continuously into slotting.

DLCVLSLT3-2.5DDLCVLSLT3-2.5D

DLCVLSLT3-2.5D

DLC MILL VL SLOT 2.5D
End mill for aluminum alloys suppresses chattering and very efficient.

DLCVLLS4-1.5D.pngDLCVLLS4-1.5D.png

DLCVLLS4-1.5D

DLC MILL 4-Flute Long Shank Square 1.5D Type
Unequal spacing of teeth and variable leads raises quality ofproduction by suppressing chattering.

GSXVL4-4D.pngGSXVL4-4D.png

GSXVL4-4D

GSX MILL VL 4D
Using unequal spacing of teeth and variable leads suppresses the chattering that often occurs during high-speed and highproductivity work.

GSXVL4T-4D.pngGSXVL4T-4D.png

GSXVL4T-4D

GSX MILL VL Ti・SUS 4D
Suitable for difficult materials such as heat-resistant alloys it has unequal tooth spacing and variable leads and a cutting edge shape with good bite to suppress chattering.

DLCVL4-2.5D.pngDLCVL4-2.5D.png

DLCVL4-2.5D

DLC MILL 4-Flute Square 2.5D Type
Unequal spacing of teeth and variable leads raises quality ofproduction by suppressing chattering.

DLCVL4-4D.pngDLCVL4-4D.png

DLCVL4-4D

DLC MILL 4-Flute Square 4D Type
Unequal spacing of teeth and variable leads raises quality ofproduction by suppressing chattering.

DLCVL6-2.5D.pngDLCVL6-2.5D.png

DLCVL6-2.5D

DLC MILL 6-Flute Square 2.5D Type
Unequal spacing of teeth and variable leads raises quality ofproduction by suppressing chattering.