AGESSL

AG-ES Drills Semi-long
This drill having semi-long length is useful in material from Carbon Steels and Stainless Steels to Aluminum.

GCOSD

G Straight Sahnk Cobalt Drills
This is general coated cobalt HSS drills having jobbers length.

MCD

MC Drills
This side lock drill having short length is very stable.

RGASD

Coated Straight Shank Drills for Aluminium
This drill specially coated is most suitable for Aluminum and Copper.

SGSD

SG Straight Shank Drills
This drill having jobbers length is suitable for workpiece materials from Carbon Steels and Stainless Steels to Aluminum. This drill is not applied to Ausutenaite Stainless Steels.

KSA

Straight Shank Palabolic Flute Drill Regular Length for Aluminium
・Tool material : HSS-Co
・Tip angle : 118°

YKS

Straight Shank Palabolic Flute Drill Regular Length
・Tool material : HSS-Co
・Tip angle : 118°

AGES

★AG-ES Drills
This drill having regular length is useful in material from Carbon Steels and Stainless Steels to Aluminum.

AGESS

★AG-ESS Drills
This drill having stub length is useful in material from Carbon Steels and Stainless Steels to Aluminum.

COTD

★Taper Shank Cobalt Drills
This is general cobalt HSS drills.

DLCHD

★DLC-HSS Drills
High efficiency drilling of Aluminum Alloy is available.

GTD

★G Taper Shank Standard Drills
This is general coated drills having jobbers length.

GTS

★G Taper Shank Short Drills
This drill having short length is suitable for high-speed drilling of most material from Stainless Steels to Aluminum.

TD

★Taper Shank Drills
This drill is applied for general purpose.

SGEZ

★SG Flat Drill
Large diameter flat drill handles countersinking angled surfaces and tapping blind holes.

NOS

★Noss Drill
This drill is used by Jacobs chucks at drill stand and power drills.

COLSD

Straight Shank Cobalt Long Drills
This is general cobalt HSS long drills for deep holes.

COSDML

Micro-Long Drills
This drill is very suited for micro and long hole.

DLCPLSD

DLC Power Long Drills
This drill is suitable for the high efficiency and deep hole drilling in aluminum alloy.

GCOSDML

G Micro-Long Drills
This is general coated drill and is suitable for micro and long hole.

GNLSD

G Non-Step Straight Shank Long Drill with Longer Flute
This is general coated drill and is suitable for non-step drilling of deep holes.

RGALSD

Coated Straight Shank Long Drills for Aluminium
This long drill specially coated is most suitable for deep holes of Aluminum and Copper.

KLA

Straight Shank Palabolic Flute Drill Long Length for Aluminium
・Tool material : HSS-Co
・Tip angle : 118°

YKL

Straight Shank Palabolic Flute Drill Long Length
・Tool material : HSS-Co
・Tip angle : 118°

KLE

Straight Shank Palabolic Flute Drill Extra Long Length
・Tool material : HSS-Co
・Tip angle : 118°

AGPLSD

★AG Power Long Drills
This drill meets non-step drilling of deep holes up to 20 times of adiameter.

LTD

★Taper Shank Long Drills
This drill having long flute is general drills for deep holes.

GLTDOH

G Taper Shank Long Drills with Oil-Hole
This is general coated taper shank long drills with oil-hole, and has rich variation of flute.

GOHL

G Oil-Hole Long Drills
This side lock shank drill having ultra long flute is general coated oil-hole drills.

GTDOH

G Taper Shank Drills with Oil-Hole
This is general coated taper shank drills with oil-hole.

SGOH3D

SG Oil-Hole Straight Shank Drill 3D
This oil hole drill is suitable for workpiece materials from Carbon Steels and Stainless Steels to Aluminum.

SGOH5D

SG Oil-Hole Straight Shank Drill 5D
This oil hole drill is suitable for workpiece materials from Carbon Steels and Stainless Steels to Aluminum.

SGOH7D

SG Oil-Hole Straight Shank Drill 7D
This oil hole drill is suitable for workpiece materials from Carbon Steels and Stainless Steels to Aluminum.

SGOH9D

SG Oil-Hole Straight Shank Drill 9D
This oil hole drill is suitable for workpiece materials from Carbon Steels and Stainless Steels to Aluminum.

GOH

★G Oil-Hole Drills
This side lock shank drill is general coated oil-hole drills.