DHS

3-Flute Semi-finishing End Mill for Nonferrous
・Tool Material：Super Grain Carbide
・Helix Angle：40°

DSF

Surface End Mill for Nonferrous
・Tool Material：Super Grain Carbide
・Helix Angle：12°

DXL

2-Flute Long End Mill for Nonferrous
・Tool Material：Super Grain Carbide
・Helix Angle：25°

DXM

2-Flute Midium End Mill for Nonferrous
・Tool Material：Super Grain Carbide
・Helix Angle：25°

NC-2

CHAMPION SOLID 2-Flute End Mill
Semi-standard item. Please inquire for price and delivery.

NC-4

CHAMPION SOLID 4-Flute End Mill
Semi-standard item. Please inquire for price and delivery.

NCL-2

CHAMPION SOLID 2-Flute Long End Mill
Long item. Please inquire for price and delivery.

NCL-4

CHAMPION SOLID 4-Flute Long End Mill
Long item. Please inquire for price and delivery.

NC-LS-2

CHAMPION SOLID 2-Flute Long Shank End Mill
2-Flute End mill with Extra Long Shank

NCM-2

CHAMPION SOLID 2-Flute Medium End Mill
Medium item. Please inquire for price and delivery.

NCM-4

CHAMPION SOLID 4-Flute Medium End Mill
Medium item. Please inquire for price and delivery.

NE-2

POWER SOLID 2-Flute End Mill
2-Flute End mill of high helix type.

NE-3

POWER SOLID 3-Flute End Mill
3-Flute End mill of high helix type.

NE-4

POWER SOLID 4-Flute End Mill
4-Flute End mill of high helix type.

NEL-3

POWER SOLID 3-Flute Long End Mill
3-Flute Long End mill of high helix type.

NHR-2X

2-Flute Long Neck End Mill
It is very suitable for cutting on narrow and deep rib by long neck end mill.

NSL-2

Straight End Mill for Reforming
・Tool Material：Super Grain Carbide
・Helix Angle：0°

NSX-6

KATABUTSU End Mill
・Tool Material：Regular Grain Carbide
・Helix Angle：40°

NX-30X

2-Flute End Mill
The length of cut is double diameter, it is for all-round cutting from roughing to finishing.

MSE230

★ MUGEN-COATING 2-Flute End Mill
・Our original MUGEN-CATING has been put on 2-flute end mill.
・It covers all-round cutting from roughing to finishing.

MSZ345

★ MUGEN-COATING 3-Flute POWER"Z"End Mill
・New fiute design brought a remarkable shearing ability.

NX-25

★ LEAD 25 End Mill
・It is possible to have high precision slotting because the length of cut is short and the helix angle is not sharp.

NX-30

★ LEAD 30End Mill
・The length of cut is double diameter, it is for all-round cutting from roughing to finishing.

NX-35

★ LEAD 35 End Mill
・The length of cut is three times dia. And helix angle is 35°
・Cutting efficiency is higher than the regular helix angle.

NX-40

★ LEAD 40 End Mill
・The length of cut is three times dia. And helix angle is 40°
・Chips can be discharged easily with high helix angle.

NX-45

★ LEAD 45 End Mill
・Long length of cut type (five times dia.)
・It can be cut deep sode well.

RSES230

★ End Mill for Resin
・Select the right one for your job, 3D or 5D or 10D Length of cut, with Extra Long-neck or without neck.
・Applicable to nonferrous material such as Aluminum and copper.