NS TOOL : NSCV-M
Chamfer Cutter
- ・Surface Treatment：MUGEN-Coating
- ・Tool Material：Micro Grain Carbide
- ・No. of Flute：3
It can be cut at the corner easily.
Tool life is exceptionally as MUGEN-COATING provides additional wear resistance.
| Code | Dia. (D) |
Taper Angle (θ) |
Length of Cut (ℓ) |
Shank Dia. (d) |
Overall Length (L) |
| NS09171 | 4 |
90° | 2 |
4 |
60 |
| NS09172 | 6 | 90° | 3 | 6 | 70 |
| Work Material | |||||||||
| Carbon Steels | Alloy Steels Tool Steels |
Prehardened Sttels |
Hardened Steels | Stainless Steels | Titanium Alloy | Aluminum | Copper | Plastic | |
| 〜55HRC | 55HRC〜 | ||||||||
| ◎ | ◎ | ◎ | ◯ | ◎ | ◯ | ◯ | ◯ | ◯ | |
NS TOOL : NSCV
Chamfer Cutter
- ・Tool Material：Micro Grain Carbide
- ・No. of Flute：3
It can be cut at the corner easily.
| Code | Dia. (D) |
Taper Angle (θ) |
Length of Cut (ℓ) |
Shank Dia. (d) |
Overall Length (L) |
| NS09173 | 4 |
90° | 2 |
4 |
60 |
| NS09174 | 6 | 90° | 3 | 6 | 70 |
| Work Material | |||||||||
| Carbon Steels | Alloy Steels Tool Steels |
Prehardened Steels | Hardened Steels | Stainless Steels | Titanium | Aluminum | Copper | Plastic | |
| 〜55HRC | 55HRC〜 | ||||||||
| ◎ | ◎ | ◎ | |||||||