CAP-EDL

Regular Grain Carbide End Mills 2 Flutes Long
for Copper, Aluminum Alloys & Plastic
Sharp cutting edges eliminate burrs on Copper, Aluminum, Plastics.

CAP-EDS

Regular Grain Carbide End Mills 2 Flutes Short
for Copper, Aluminum Alloys & Plastic
Sharp cutting edges eliminate burrs on Copper, Aluminum, Plastics.

CAP-EDS-SF

GX3000 Carbide End Mills 3 Flutes Short
Additional to the original series of precision ultra micro machining for Aluminum Alloys

CRN-EDL

Regular Grain Carbide End Mills CrN coated 2 Flutes Long
for Copper, Aluminum Alloys & Plastic
CrN coating with better lubrication works better on Copper Alloys, Aluminum Alloys, and Plastics.

CRN-EDLL

Carbide End Mills CrN coated 2 Flutes Extra Long
for Copper, Alminum Alloys and Plastic
CrN coating with better lubrication works better on Copper Alloys, Aluminum Alloys, and Plastics.

CRN-EDN

Carbide End Mills CrN coated 2 Flutes Extra Long
for Copper, Alminum Alloys and Plastic
Carbide End Mills CrN coated 2 Flutes Medium for Copper, Alminum Alloys and Plastic

CRN-EDS

Regular Grain Carbide End Mills CrN coated 2 Flutes Short
for Copper, Aluminum Alloys & Plastic
Carbide End Mills CrN coated 2 Flutes Medium for Copper, Alminum Alloys and Plastic

CRN-EDS-3

CrN coated 2 Flutes Miniature Short
for Copper, Alminum Alloys and Plastic
CrN coating with better lubrication works better on Copper Alloys, Aluminum Alloys, and Plastics. Best for Copper electrodes, Copper Alloys parts for IT industry.

CRN-HS-EDS

CrN coated 2 Flutes Short
with HS Shank for Copper, Alminum Alloys and Plastic
Designed to minimize the overhang length with HSK holders. Best for high speed Copper electrode machining.

CRN-EDL-4

CrN coated 2 Flutes Miniature Long
for Copper, Alminum Alloys and Plastic
CrN coating with better lubrication works better on Copper Alloys, Aluminum Alloys, and Plastics. Gives shiny surface finish on Copper Electrode machining.

CRN-EMS

CrN coated 4 Flutes Short
for Copper, Aluminum Alloys and Plastic
CrN coating and a tooth design that delivers high cutting force allow this mill to perform finishing process on copper and copper alloys and give excellent surface finish.

CRN-EML

Regular Grain Carbide End Mills CrN coated 2 Flutes Short
for Copper, Aluminum Alloys & Plastic
Carbide End Mills CrN coated 2 Flutes Medium for Copper, Alminum Alloys and Plastic

DIA-ETS

Carbide End Mills Diamond Coated 3 Flutes Short
・Tool material : Carbide
・Surface treatment : DIA
・No. of Flute : 3

FX-ED-DL-6

ULTRA FX Micro Grain Carbide End Mills
TiAlN coated 2 Flutes (φ6 shank DL Type)
・Tool material : Carbide
・Surface treatment : FX
・No. of Flute : 2

FX-EDSS-6

ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Stub (φ6 shank)
・Tool material : Carbide
・Surface treatment : FX
・No. of Flute : 2

FX-MG-EDL-3

ULTRA FX Micro Grain Carbide Miniature (φ3 shank)
End Mills TiAlN coated 2 Flutes Long
・Tool material : Carbide
・Surface treatment : FX
・No. of Flute : 2

FX-MG-EDLL-3

ULTRA FX Micro Grain Carbide Miniature (φ3 shank)
End Mills TiAlN coated 2 Flutes Extra Long
・Tool material : Carbide
・Surface treatment : FX
・No. of Flute : 2

FX-MG-EDN

ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Medium
・Tool material : Carbide
・Surface treatment : FX
・No. of Flute : 2

FX-MG-EMS OH1

ULTRA FX Micro Grain Carbide End Mills
TiAlN coated 4 Flutes Short (OH1)
End mill with O/D plus side tolerance 0～+0.020

FX-NC-EDSS

ULTRA FX Micro Grain CarbideEnd Mills
TiAlN coated 2 Flutes Stub for Lathe Machine
Shorter OAL and shorter flute length suited for lathe, automatic lathe,

FX-NC-EMSS

ULTRA FX Micro Grain CarbideEnd Mills
TiAlN coated 2 Flutes Stub for Lathe Machine
Shorter OAL and shorter flute length suited for lathe, automatic lathe, multitask machining center, etc.

FXS-LS-EMS-S

ULTRA FX SUPER Micro Grain Carbide End Mills
TiAlN coated Multiple Flutes Extra Short with Long Shank
Rigid body long shank end mill. Applicable for both general and quenched steels.

IT-EDS

Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short for Kovar
・Tool material : Carbide
・Surface treatment : FX
・No. of Flute : 2

IT-EDS-6

Micro Grain Carbide End Mills TiAlN coated
2 Flutes Short for Kovar (φ6 Shank)
・Tool material : Carbide
・Surface treatment : FX
・No. of Flute : 2

IT-EMS

Micro Grain Carbide End Mills TiAlN coated
4 Flutes Short for Kovar
・Tool material : Carbide
・Surface treatment : FX
・No. of Flute : 4

IT-EMS-6

Micro Grain Carbide End Mills TiAlN coated
4 Flutes Short for Kovar (φ6 Shank)
・Tool material : Carbide
・Surface treatment : FX
・No. of Flute : 4

MG-EDS

Micro Grain Carbide End Mills 2 Flutes Short
・Tool material : Carbide
・No. of Flute : 2

MG-EDL

Micro Grain Carbide End Mills 2 Flutes Long
・Tool material : Carbide
・No. of Flute : 2

MG-EDL-3

Micro Grain Carbide Miniature(φ3 Shank) End Mills 2 Flutes Long
・Tool material : Carbide
・No. of Flute : 2

MG-EDLL-3

Micro Grain Carbide Miniature(φ3 Shank) End Mills 2 Flutes Extra Long
・Tool material : Carbide
・No. of Flute : 2

MG-EMS

Micro Grain Carbide End Mills 4 Flutes Short
・Tool material : Carbide
・No. of Flute : 4

MG-EML

Micro Grain Carbide End Mills 4 Flutes Long
・Tool material : Carbide
・No. of Flute : 4

NC-EMSS

Carbide End Mills 4 Flutes Stub for Lathe Machine
・Tool material : Carbide
・No. of Flute : 4

FX-MG-EDS-OH1

ULTRA FX Micro Grain Carbide End Mills
TiAlN coated 2 Flutes Short (OH1)
End mill with O/D plus side tolerance 0～ +0.020

FX-MR-EDS

ULTRA FX Micro Grain Carbide End Mills
TiAlN coated 4 Flutes Short (OH1)
Left hand cut and left handed spiral fluted end mill

CA-ETS

★Regular Grain Carbide End Mills
3 Flutes Short for Copper and Aluminum Alloys
High effeciency operation for slotting and side milling can be realized thanks to a sharp cutting edge and wide chip pocket room.

CA-RG-EDS

★Regular Grain Carbide End Mills
2 Flutes Short for Copper & Aluminum Alloys
For copper and aluminum alloy. Reduces chattering and provides an excellent machined surface.

CRN-EMS

★Regular Grain Carbide End Mills
CrN coated 4 Flutes Short for Copper, Aluminum Alloys and Plastic
CrN coating and a tooth design that delivers high cutting force allow this mill to perform finishing process on copper and copper alloys and give excellent surface finish.

DIA-EDS

★Carbide End Mills
Diamond Coated 2 Flutes Short
Shows long tool life on High Silicon contents alloys, and Graphite machining.

FX-MG-EML

★ULTRA FX Micro Grain Carbide End Mills
TiAlN coated 4 Flutes Long
4-fluted end mill for general applications. Employs long edges and FX coating.

FX-MG-EXDL

★ULTRA FX Micro Grain Carbide End Mills
TiAlN coated 2 Flutes Extra Long
2-fluted end mill for general applications. Made with extra long edges and FX coating.

FXS-EMS

★ULTRA FX SUPER Micro Grain Carbide End Mills
TiAlN coated Multiple Flutes Short
Rigid body long shank end mill. Applicable for both general and quenched steels.

MG-EXDL

★Micro Grain Carbide End Mills 2 Flutes Extra Long

MG-EXML

★Micro Grain Carbide End Mills 4 Flutes Extra long

FX-EDS-6

ULTRA FX Micro Grain Carbide End Mills
TiAlN coated 2 Flutes Short (φ6 shank)
This high speed end mill to maximizes the performance of high speed and high precision machining centers.

FX-MG-EDS

ULTRA FX Micro Grain Carbide End Mills
TiAlN coated 2 Flutes Short
2-fluted end mill for general applications. Employs FX coating.

FX-MG-EDSS

ULTRA FX Micro Grain Carbide End Mills
TiAlN coated 2 Flutes stub
Suitable for high speed machining centers. Made with extra short cutting length (1.5 X mill dia.)

FX-MG-EMS

ULTRA FX Micro Grain Carbide End Mills
TiAlN coated 4 Flutes Short
4-fluted end mill for general applications. Employs FX coating and is applicable for high speed and high feed operations.

FX-MG-EMSS

ULTRA FX Micro Grain Carbide End Mills
TiAlN coated 4 Flutes stub
Suitable for high speed machining centers. Made with extra short cutting length (1.5 X mill dia.)

FXS-EMS

ULTRA FX SUPER Micro Grain Carbide End Mills
TiAlN coated Multiple Flutes Short
Rigid body long shank end mill. Applicable for both general and quenched steels.

FXS-EML

ULTRA FX SUPER Micro Grain Carbide End Mills
TiAlN coated Multiple Flutes Long
Made with especially designed rigid long edges. Applicable for both general and quenched steels.

FXS-LS-EMS

ULTRA FX SUPER Micro Grain Carbide End Mills
TiAlN coated Multiple Flutes Short with Long Shank
Rigid body long shank end mill. Applicable for both general and quenched steels.

GF-EDR

Regular Grain Carbide End Mills
2 Flutes Regular for Graphite
Employs micro grain carbide body for high wear resistance. Maximizes tool life when milling graphite materials.

GF-EDL

Regular Grain Carbide End Mills
2 Flutes Long for Graphite
Employs micro grain carbide body for high wear resistance. Maximizes tool life when milling graphite materials.

GF-EMR

Regular Grain Carbide End Mills
4 Flutes Regular for Graphite
Employs micro grain carbide body for high wear resistance. Maximizes tool life when milling graphite materials.

GF-EML

Regular Grain Carbide End Mills
4 Flutes Long for Graphite
Employs micro grain carbide body for high wear resistance. Maximizes tool life when milling graphite materials.

GF-LS-EDR

Regular Grain Carbide End Mills
2 Flutes Regular with Long Shank for Graphite
Employs micro grain carbide body for high wear resistance. Maximizes tool life when milling graphite materials.

GF-LS-EMR

Regular Grain Carbide End Mills
4 Flutes Regular with Long Shank for Graphite
Employs micro grain carbide body for high wear resistance. Maximizes tool life when milling graphite materials.

CAP-LN-EDS

Regular Grain Carbide End Mills 2 Flutes Short
with Long Neck for Copper, Aluminum Alloys & Plastic
・Tool material : Carbide
・No. of Flute : 2

CAP-LN-EDS-SF

GX3000 Carbide End Mills 3 Flutes Short with Long Neck
・Tool material : Carbide
・No. of Flute : 2

DIA-LN-EDS

GX3000 Carbide End Mills 3 Flutes Short with Long Neck
・Tool material : Carbide
・Surface treatment : DIA
・No. of Flute : 2

DIA-LN-EMS

Carbide End Mills Diamond Coated 4 Flutes Short with Long Neck
・Tool material : Carbide
・Surface treatment : DIA
・No. of Flute : 4

CRN-LN-EDS

CrN coated 2 Flutes Long neck Short
for Copper, Aluminum Alloys and Plastic
Best for high speed and precision machining of Copper electrodes.

FX-LN-EDS-6

ULTRA FX Micro Grain Carbide End Mills
TiAlN coated 2 Flutes Short with Long Neck (φ6 shank)
High speed long neck end mill. Maximizes performance of high speed and high precision machining centers.

FX-LN-EMS-6

ULTRA FX Micro Grain Carbide End Mills
TiAlN coated 4 Flutes Short with Long Neck (φ6 shank)
High speed long neck end mill. Maximizes performance of high speed and high precision machining centers.

WX-LN-EDS

ULTRA WX End Mills TiAlN coated
2 Flutes Short with Long Neck
Suitable for rib processing and very fine operations. Select appropriate cutting length for different operations.

WX-LN-EMS

ULTRA WX End Mills TiAlN coated
4 Flutes Short with Long Neck
Suitable for rib processing and very fine operations. Select appropriate cutting length for different operations.

FX-RB-EGS

★ULTRA FX Micro Grain Carbide End Mills
TiAlN coated 2 Flutes for Rib processing
Suitable for rib processing and very fine operations.
Select appropriate cutting length for different operations.

DIA-EHDL

Carbide End Mills Diamond Coated
2 Flutes High Helix Long
・Tool material : Carbide
・Surface treatment : DIA
・No. of Flute : 2

DIA-EHDL-3

Carbide End Mills Diamond Coated
2 Flutes High Helix Long（φ3 Shank）
・Tool material : Carbide
・Surface treatment : DIA
・No. of Flute : 2

DIA-EHDS

Carbide End Mills Diamond Coated
2 Flutes High Helix Short
・Tool material : Carbide
・Surface treatment : DIA
・No. of Flute : 2

DIA-EHDS-3

Carbide End Mills Diamond Coated
2 Flutes High Helix Short（φ3 Shank）
・Tool material : Carbide
・Surface treatment : DIA
・No. of Flute : 2

DIA-LS-EHDL

Carbide End Mills Diamond Coated
2 Flutes High Helix Long with Long Shank
・Tool material : Carbide
・Surface treatment : DIA
・No. of Flute : 2

DIA-LS-EHDS

Carbide End Mills Diamond Coated
2 Flutes High Helix Long with Long Shank
・Tool material : Carbide
・Surface treatment : DIA
・No. of Flute : 2

MG-EHS

Micro Grain Carbide High Helix End Mills Short
・Tool material : Carbide
・No. of Flute : 3

WX-LS-RESF

ULTRA WX Micro Grain Carbide End Mills
TiAlN coated Roughing End Mills with Long Shank
Large depths of cut are possible thanks to the reduction in cutting force provided by the wavelike flute form. Even during heavy chatter rough milling, high efficiency can be achieved.

WX-RESF

★ULTRA WX Micro Grain Carbide End Mills
TiAlN Coated Roughing
Large depths of cut are possible thanks to the reduction in cutting force provided by the wavelike flute form. Even during heavy chatter rough milling, high efficiency can be achieved.

WX-RESF-H

★ULTRA WX Micro Grain Carbide End Mills
TiAlN Coated Roughing　for High-helix Type
High spiral roughing end mill. Works on soft steel, Stainless steel, Titanium alloys.