Solid Carbide Drills Stub for High Speed Processing

FS-GDS

[ Tool material : Carbide | Surface treatment :FX coating | Tip Angle : 140° ]
・Superior wear resistance for high speed operations.
Download

Solid Carbide Drills Medium for High Speed Processing

FS-GDN

[ Tool material : Carbide | Surface treatment :FX coating | Tip Angle : 140° ]
・Superior wear resistance for high speed operations.
Download

Solid Carbide Drills Stub for General Application

FT-GDS

[ Tool material : Carbide | Surface treatment :FX coating | Tip Angle : 140° ]
・Suitable for difficult to machine materials and can be used on low rigidity machines and lathe machines.
Download

Solid Carbide Drills Medium for General Application

FT-GDN

[ Tool material : Carbide | Surface treatment :FX coating | Tip Angle : 140° ]
・Suitable for difficult to machine materials and can be used on low rigiditymachines and lathe machines.
Download

Carbide Drills (PCD Helix Twist Drill for Aluminum Alloy with High Silicon)

PCD-GDN

[ Tool material : Carbide | Surface treatment : - | Tip Angle : 120° ]
・Thanks to specially selected PCD(polycrystalline diamond), PCD-GDN has high wear resistance that extends its tool life.
Download

Solid Carbide Drills Stub with Internal Coolant Supply

FTO-GDS

[ Tool material : Carbide | Surface treatment : FXⅠ coating | Tip Angle : 140° ]
Download

Solid Carbide Drills Medium with Internal Coolant Supply

FTO-GDN

[ Tool material : Carbide | Surface treatment : FXⅠ coating | Tip Angle : 140° ]
Download

WDI Coated Carbide Drill with Internal Coolant Supply (25D Type)

WDO-25D

[ Tool material : Carbide | Surface treatment : WDⅠ coating | Tip Angle : 140° ]
・A special design gave low thrust and stable torque against interrupted cutting! With WDⅠ coating, it made possible to drill up to 25D deep with high speed and long tool life.
Download

Solid Carbide Drills Stub with Internal Coolant Supply

FX-HO-GDS

[ Tool material : Carbide | Surface treatment : FX coating | Tip Angle : 140° ]
Download

Solid Carbide Drills Regular with Internal Coolant Supply

FX-HO-GDR

[ Tool material : Carbide | Surface treatment : FX coating | Tip Angle : 140° ]
Download

Solid Carbide Drills Regular with Internal Coolant Supply

FX-HO-GDL

[ Tool material : Carbide | Surface treatment : FX coating | Tip Angle : 140° ]
Download

Solid Carbide Drills for Stainless (Micro Revolution Drill)

MRS-GDN

[ Tool material : Carbide | Surface treatment :Smooth coating | Tip Angle : 120° ]
・Sharp cutting edge + fl ute form that is ideal for chip evacuation.
Download

Solid Carbide Ultra Small Size UVM Drills

UVM-DRL

[ Tool material : Carbide | Surface treatment : SS | Tip Angle : 120° ]
・Ultra small size ever. The smallest size 0.02mm.
Download