Product information
ADVL・ADVLRE【Variable Lead End Mill】NEW
The variable lead shape stabilizes cutting resistance to isolate vibration.
PCDRS【PCD Radius End Mill】NEW
Prolonged stable high quality surface on the curved and plane surface on cemented carbide cutting.
NS TOOL Ball End Mill for Hard Brittle Materials NEW
It is most appropriate for the use of direct cutting of cemented carbide
YSK ADVANCED End Mill for Alminum NEW
3-Flute Carbide end mills for Aluminum 3D Type and 5D Type
GCONOS【TiN Coating Cobalt Nos Drill】
This drill is used by jacobs chucks at drill stand and power drills.
NACHI AQDEXZ-R【AQUA Drill EX Flat Radius】
Radius blind hole, one operation drilling with no prepared hole
NS TOOL SSPB220
CBN Super Spiral Ball End Mill
To Higher-grade Machined Surface Realized the New Level of Quality and Glossy Surface!
NACHI AQDEXST
AQUA Drill EX Starting
Achieve high speed centering and long tool life for centering, chamfering and V-grooving.
OSG NC PLANET CUTTER
The new generation thread milling cutter for synchronized 3 axis machining center.
NACHI AQDEXVF
AQUA Drill EX VF
Indexable insert drills for drilling easily even difficult-to-cut materials
NS TOOL MUGEN-COATING M-Thread Mill
Realized highly-efficient thread milling by mutiple cutting edges!
NACHI AQDEXOH3F3D,5D
AQUA Drills EX Oil-Hole 3 Flutes
Superior balance of three cutting edges is excellent for high-precision drilling.
HITACHI TOOL EHHB-ATH
Epoch Quattro High Hard Ball
Achieves high-efficiency direct cutting of hardened steels.
OSG ZDS
End Mill for Counterboring Series
Its ability is brought into full play when machining slopes!!
Plentiful variety of sizes
NS TOOL MRBTNH345
3-Flute Long Taper Neck Ball End Mill
High efficient and accurate milling on deep machining profile
OSG SI-○○RESF
Silent Roughing End Mill Series
Roughing shape appeared in the lead unequal "HSS" &"Carbide" end mills
NS TOOL PCDSE
PCD Square End Mill
Fine and stable milling surface realized on cemented carbide material.
NS TOOL SSE400/SSE600
CBN Square End Mill
Realization of the ideal tool life and machining profile
EIKOSHA CSER-C
TiCN2 Coated Solid Carbide Reamer For Blind Hole
Right hand spiral enables smooth removing of chips.
DIJET DV-SCMS
Solid carbide end mill for heat-resistant alloy
Solid carbide end mill for heat-resistant alloy with high speed and high efficient cutting
NACHI SGESR
SG-ESR Drills
Super general purpose drill handles a wide range for work materials ranging from aluminum, to steel and stainless steel.
EIKOSHA Carbide Solid Super mini Cutter with Slim Shank
Super Mini Cutter with Slim Shank Line Up.
NACHI GSX MILL VL Series
Endmill with unequal tooth spacing and variable leads to suppress chattering
OSG WD-2D, 4D
WD Carbide Drill
Size lineup in 0.1mm steps completed.
(for 2mm through 12mm of WD-2D and 2mm through 20mm of WD-4D)
NS TOOL DCMS
End Mill for Hard Brittle Materials
Machinable on hard brittle materials such as carbide and ceramic.
NACHI GSX Mill Ball End Mill
Ball end mill handles materials from the general to the high-speed range
EIKOSHA Carbide Solid Spherical Cutter
Cutter with processing that was not possible with the end mill.
NS TOOL MSXH440R
MUGEN Premium Power Radius End Mill
High-efficiency milling on (SUS, Ti, etc) tough materials
NACHI AQDEXRN
AQUA Drill EX for Titanium Alloys and Nickel Alloys
This drill has both wear and chipping resistance for heat resistant alloys that are difficult to handle.
