Carbide End Mills Diamond Coated 3 Flutes Short

DIA-ETS

[ Tool material : Carbide | Surface treatment : DIA coating | No. of Flute : 3 ]
Download

Regular Grain Carbide End Mills 2 Flutes Long for Copper, Aluminum Alloys & Plastic

CAP-EDL

[ Tool material : Carbide | Surface treatment : - | No. of Flute : 2 ]
・Sharp cutting edges eliminate burrs on Copper, Aluminum, Plastics.
Download

Regular Grain Carbide End Mills 2 Flutes Short for Copper, Aluminum Alloys & Plastic

CAP-EDS

[ Tool material : Carbide | Surface treatment : - | No. of Flute : 2 ]
・Sharp cutting edges eliminate burrs on Copper, Aluminum, Plastics.
Download

GX3000 Carbide End Mills 3 Flutes Short

CAP-EDS-SF

[ Tool material : Carbide | Surface treatment : - | No. of Flute : 2 ]
・Additional to the original series of precision ultra micro machining for Aluminum Alloys
Download

Regular Grain Carbide End Mills CrN coated 2 Flutes Long for Copper, Aluminum Alloys & Plastic

CRN-EDL

[ Tool material : Carbide | Surface treatment : CrN coating | No. of Flute : 2 ]
・CrN coating with better lubrication works better on Copper Alloys, Aluminum Alloys, and Plastics.
Download

Carbide End Mills CrN coated 2 Flutes Extra Long for Copper, Alminum Alloys and Plastic

CRN-EDLL

[ Tool material : Carbide | Surface treatment : CrN coating | No. of Flute : 2 ]
・CrN coating with better lubrication works better on Copper Alloys, Aluminum Alloys, and Plastics.
Download

Carbide End Mills CrN coated 2 Flutes Extra Long for Copper, Alminum Alloys and Plastic

CRN-EDN

[ Tool material : Carbide | Surface treatment : CrN coating | No. of Flute : 2 ]
・Carbide End Mills CrN coated 2 Flutes Medium for Copper, Alminum Alloys and Plastic
Download

Regular Grain Carbide End Mills CrN coated 2 Flutes Short for Copper, Aluminum Alloys & Plastic

CRN-EDS

[ Tool material : Carbide | Surface treatment : CrN coating | No. of Flute : 2 ]
・Carbide End Mills CrN coated 2 Flutes Medium for Copper, Alminum Alloys and Plastic
Download

Regular Grain Carbide End Mills CrN coated 2 Flutes Short for Copper, Aluminum Alloys & Plastic

CRN-EML

[ Tool material : Carbide | Surface treatment : CrN coating | No. of Flute : 4 ]
・Carbide End Mills CrN coated 2 Flutes Medium for Copper, Alminum Alloys and Plastic
Download

ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes (φ6 shank DL Type)

FX-ED-DL-6

[ Tool material : Carbide | Surface treatment : FX coating | No. of Flute : 2 ]
Download

ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Stub (φ6 shank)

FX-EDSS-6

[ Tool material : Carbide | Surface treatment : FX coating | No. of Flute : 2 ]
Download

ULTRA FX Micro Grain Carbide Miniature (φ3 shank) End Mills TiAlN coated 2 Flutes Long

FX-MG-EDL-3

[ Tool material : Carbide | Surface treatment : FX coating | No. of Flute : 2 ]
Download

ULTRA FX Micro Grain Carbide Miniature (φ3 shank) End Mills TiAlN coated 2 Flutes Extra Long

FX-MG-EDLL-3

[ Tool material : Carbide | Surface treatment : FX coating | No. of Flute : 2 ]
Download

ULTRA FX Micro Grain Carbide Miniature (φ3 shank) End Mills TiAlN coated 2 Flutes Extra Long

FX-MG-EDN

[ Tool material : Carbide | Surface treatment : FX coating | No. of Flute : 2 ]
Download

ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short (OH1)

FX-MG-EDS-OH1

[ Tool material : Carbide | Surface treatment : FX coating | No. of Flute : 2 ]
・End mill with O/D plus side tolerance 0～ +0.020
Download

ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Short (OH1)

FX-MG-EMS-OH1

[ Tool material : Carbide | Surface treatment : FX coating | No. of Flute : 4 ]
・End mill with O/D plus side tolerance 0～+0.020
Download

ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Short (OH1)

FX-MR-EDS

[ Tool material : Carbide | Surface treatment : FX coating | No. of Flute : 2 ]
・Left hand cut and left handed spiral fluted end mill
Download

ULTRA FX Micro Grain CarbideEnd Mills TiAlN coated 2 Flutes Stub for Lathe Machine

FX-NC-EDSS

[ Tool material : Carbide | Surface treatment : FX coating | No. of Flute : 2 ]
・Shorter OAL and shorter flute length suited for lathe, automatic lathe,
Download

ULTRA FX Micro Grain CarbideEnd Mills TiAlN coated 2 Flutes Stub for Lathe Machine

FX-NC-EMSS

[ Tool material : Carbide | Surface treatment : FX coating | No. of Flute : 4 ]
・Shorter OAL and shorter flute length suited for lathe, automatic lathe, multitask machining center, etc.
Download

ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated Multiple Flutes Extra Short with Long Shank

FXS-LS-EMS-S

[ Tool material : Carbide | Surface treatment : FX coating | No. of Flute : 4 ]
・Rigid body long shank end mill. Applicable for both general and quenched steels.
Download

Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short for Kovar

IT-EDS

[ Tool material : Carbide | Surface treatment : FX coating | No. of Flute : 2 ]
Download

Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short for Kovar (φ6 Shank)

IT-EDS-6

[ Tool material : Carbide | Surface treatment : FX coating | No. of Flute : 2 ]
Download

Micro Grain Carbide End Mills TiAlN coated 4 Flutes Short for Kovar

IT-EMS

[ Tool material : Carbide | Surface treatment : FX coating | No. of Flute : 4 ]
Download

Micro Grain Carbide End Mills TiAlN coated 4 Flutes Short for Kovar (φ6 Shank)

IT-EMS-6

[ Tool material : Carbide | Surface treatment : FX coating | No. of Flute : 4 ]
Download

Micro Grain Carbide Miniature(φ3 Shank) End Mills 2 Flutes Long

MG-EDL-3

[ Tool material : Carbide | Surface treatment : - | No. of Flute : 2 ]
Download

Micro Grain Carbide Miniature(φ3 Shank) End Mills 2 Flutes Extra Long

MG-EDLL-3

[ Tool material : Carbide | Surface treatment : - | No. of Flute : 2 ]
Download

Carbide End Mills 4 Flutes Stub for Lathe Machine

NC-EMSS

[ Tool material : Carbide | Surface treatment : - | No. of Flute : 4 ]
Download

Carbide End Mills Diamond Coated 2 Flutes High Helix Long

DIA-EHDL

[ Tool material : Carbide | Surface treatment : DIA coating | No. of Flute : 2 ]
Download

Carbide End Mills Diamond Coated 2 Flutes High Helix Long（φ3 Shank）

DIA-EHDL-3

[ Tool material : Carbide | Surface treatment : DIA coating | No. of Flute : 2 ]
Download

Carbide End Mills Diamond Coated 2 Flutes High Helix Short

DIA-EHDS

[ Tool material : Carbide | Surface treatment : DIA coating | No. of Flute : 2 ]
Download

Carbide End Mills Diamond Coated 2 Flutes High Helix Short（φ3 Shank）

DIA-EHDS-3

[ Tool material : Carbide | Surface treatment : DIA coating | No. of Flute : 2 ]
Download

Carbide End Mills Diamond Coated 2 Flutes High Helix Long with Long Shank

DIA-LS-EHDL

[ Tool material : Carbide | Surface treatment : DIA coating | No. of Flute : 2 ]
Download

Carbide End Mills Diamond Coated 2 Flutes High Helix Long with Long Shank

DIA-LS-EHDS

[ Tool material : Carbide | Surface treatment : DIA coating | No. of Flute : 2 ]
Download

Regular Grain Carbide End Mills 2 Flutes Short with Long Neck for Copper, Aluminum Alloys & Plastic

CAP-LN-EDS

[ Tool material : Carbide | Surface treatment : - | No. of Flute : 2 ]
Download

GX3000 Carbide End Mills 3 Flutes Short with Long Neck

CAP-LN-EDS-SF

[ Tool material : Carbide | Surface treatment : - | No. of Flute : 2 ]
Download

GX3000 Carbide End Mills 3 Flutes Short with Long Neck

DIA-LN-EDS

[ Tool material : Carbide | Surface treatment : DIA coating | No. of Flute : 2 ]
Download

Carbide End Mills Diamond Coated 4 Flutes Short with Long Neck

DIA-LN-EMS

[ Tool material : Carbide | Surface treatment : DIA coating | No. of Flute : 4 ]
Download

ULTRA WX Micro Grain Carbide End Mills TiAlN coated Roughing End Mills with Long Shank

WX-LS-RESF

[ Tool material : Carbide | Surface treatment : WX coating | No. of Flute : 4 ]
Download

Carbide End Mills Diamond Coated 2 Flutes Short with Corner Radius

DIA-CR-EDS

[ Tool material : Carbide | Surface treatment : DIA coating | No. of Flute : 2 ]
Download

ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Short with Corner Radius

FX-CR-MG-EMS

[ Tool material : Carbide | Surface treatment : FX coating | No. of Flute : 4 ]
Download

ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Long Neck with Corner Radius (φ6 shank)

FX-LN-CR-EDS-6

[ Tool material : Carbide | Surface treatment : FX coating | No. of Flute : 2 ]
Download

ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated Multiple Flutes Long with Corner Radius

FXS-CR-EML

[ Tool material : Carbide | Surface treatment : FX coating | No. of Flute : 4 ]
・Rigid radius end mill for high speed operations. Applicable for quenched steels.
Download

ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated 4 Flutes Regular for High Speed Pocket operation

FXS-PKER

[ Tool material : Carbide | Surface treatment : FX coating | No. of Flute : 4 ]
Download

Micro Grain Carbide End Mills 2 Flutes Short with Corner Radius

MG-CR-EDS

[ Tool material : Carbide | Surface treatment : - | No. of Flute : 2 ]
Download

Micro Grain Carbide End Mills 4 Flutes Short with Corner Radius

MG-CR-EMS

[ Tool material : Carbide | Surface treatment : - | No. of Flute : 4 ]
Download

Micro Grain Carbide End Mills 2 Flutes Short with Corner Chamfering

MG-CS-EDS

[ Tool material : Carbide | Surface treatment : - | No. of Flute : 2 ]
Download

ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Chamfering

FX-CS-EDS

[ Tool material : Carbide | Surface treatment : FX coating | No. of Flute : 2 ]
Download

ULTRA FX Micro Grain Carbide End Mills TiAlN Corted Medium2 Flutes for Counterboring

FX-ZDN

[ Tool material : Carbide | Surface treatment : FX coating | No. of Flute : 2 ]
・Its ability is brought into full play when machining slopes

ULTRA FX Micro Grain Carbide End Mills TiAlN Corted 2 Flutes Long Shank for Counterboring

FX-LS-ZDS

[ Tool material : Carbide | Surface treatment : FX coating | No. of Flute : 2 ]
・Its ability is brought into full play when machining slopes

FX Coated 2Flutes Medium for Counterboring with Internal Coolant Supply

FX-HO-ZDN

[ Tool material : Carbide | Surface treatment : FX coating | No. of Flute : 2 ]
・Its ability is brought into full play when machining slopes

Carbide End Mills Diamond Coated 2 Flutes for Counterboring

DIA-ZDS

[ Tool material : Carbide | Surface treatment : DIA coating | No. of Flute : 2 ]
・Its ability is brought into full play when machining slopes

2Flute Short for Counterboring(for Copper・Aliminum Alloy)

CA-ZDS

[ Tool material : Carbide | Surface treatment : - | No. of Flute : 2 ]
・Its ability is brought into full play when machining slopes

Download

Diamond coated with flute router

DIA-DCE

[ Tool material : Carbide | Surface treatment : DIA ]
・These metric size series cross-flute routers are ideal for a wide variety of polymer-base, metal-base, and ceramic-base composite materials. The end cutting teeth are for end milling,

Diamond coated with flute router

DIA-DCE-D

[ Tool material : Carbide | Surface treatment : DIA ]
・These metric size series cross-flute routers are ideal for a wide variety of polymer-base, metal-base, and ceramic-base composite materials. The end cutting teeth are for end milling,

Diamond coated with flute router

DIA-DCE-N

[ Tool material : Carbide | Surface treatment : DIA ]
・These metric size series cross-flute routers are ideal for a wide variety of polymer-base, metal-base, and ceramic-base composite materials. The end cutting teeth are for end milling,

Multi-flute finishing router

DIA-MFC

[ Tool material : Carbide | Surface treatment : DIA ]
・Can be used for the general fi nishing of a wide variety of composite materials.

General purpose routers: with corner radius

DIA-MRC

[ Tool material : Carbide | Surface treatment : DIA ]
・ceramic-base composite materials. The end cutting teeth have corner radius, and a large range of radius sizes are available.

For trimming laminates: Cross flute router

DIA-TRE

[ Tool material : Carbide | Surface treatment : DIA ]
・This is for trimming laminates. The cross-fl ute shape of the cutting edges suppresses the occurrence of burrs.

For trimming laminates: Cross flute router

DIA-TRE-D

[ Tool material : Carbide | Surface treatment : DIA ]
・This is for trimming laminates. The end cutting teeth are designed as a drill to perform plunging and repeated side thrust machining.

Download