OSG：Router for compasite materials | TOKYO YAMAKATSU CORPORATION

HOME > Product information > End Mills > OSG：CFRP

Endmills

OSG

COMPOSITE SOLUTION

DIA-BNC

Diamond coated with fune pitch nicked
●Nicks are added to the multiple fl utes, making high effi ciency, long tool life machining from trimming to routing possible.
Tool Material：Carbide

DIA-BNC
TY-Code	Dia. (Dc)	Length of Cut (ℓ)	Overall Length (L)	Shank (Ds)	Flute (Z)	End cutting teeth
OS32207	4	12	62	4	6	2
OS32208	6	18	68	6	8	2
OS32209	8	24	74	8	10	2
OS32210	10	30	80	10	12	2
OS32211	12	37	86	12	14	2

DIA-HBC4

Diamond coated herringbone 4flute cutter
●The deep fl ute, low resistance design is well suited for machining thick plates.
Tool Material：Carbide

DIA-HBC4
TY-Code	Dia. (Dc)	Length of Cut (ℓ)	Overall Length (L)	Shank (Ds)	Flute (Z)	End cutting teeth
OS32212	4	12	62	4	4	4
OS32213	6	15	65	6	4	4
OS32214	6	18	68	6	4	4
OS32215	8	20	70	8	4	4
OS32216	8	24	74	8	4	4
OS32217	10	25	75	10	4	4
OS32218	10	30	80	10	4	4
OS32219	12	36	86	12	4	4

DIA-DCE

Diamond coated with Cross flute router
●These metric size series cross-flute routers are ideal for a wide variety of polymer-base,
metal-base, and ceramic-base composite materials. The end cutting teeth are for end milling,
Tool Material：Carbide

DIA-DCE
TY-Code	Dia. (Dc)	Length of Cut (ℓ)	Overall Length (L)	Shank (Ds)	End cutting teeth
OS32704	2	8	45	4	2
OS32705	2.5	10	45	4	2
OS32706	3	10	60	6	2
OS32707	3.5	12	60	6	2
OS32708	4	16	60	6	2
OS32709	4.5	16	60	6	2
OS32710	5	19	60	6	2
OS32711	6	19	60	6	2
OS32712	7	22	65	8	2
OS32713	8	26	70	8	2
OS32714	9	26	75	10	2
OS32715	10	32	80	10	2
OS32717	12	38	90	12	2

DIA-DCE-N

Diamond coated with Cross flute router
●These metric size series cross-flute routers are ideal for a wide variety of polymer-base,
metal-base, and ceramic-base composite materials. The cross-flute shape of the cutting edges suppresses the occurrence of burrs and edge chipping.
Tool Material：Carbide

DIA-DCE-N
TYコード	Dia. (Dc)	Length of Cut (ℓ)	Overall Length (L)	Shank (Ds)
OS32678	2	8	45	4
OS32679	2.5	10	45	4
OS32680	3	10	60	6
OS32681	3.5	12	60	6
OS32682	4	16	60	6
OS32683	4.5	16	60	6
OS32684	5	19	60	6
OS32685	6	19	60	6
OS32686	7	22	65	8
OS32687	8	26	70	8
OS32688	9	26	75	10
OS32689	10	32	80	10
OS32690	12	38	90	12

DIA-DCE-D

DIA-DCE-D
TY-Code	Dia. (Dc)	Length of Cut (ℓ)	Overall Length (L)	Shank (Ds)	End cutting teeth
OS32691	2	8	45	4	2-Flute Drill(135°)
OS32692	2.5	10	45	4	2-Flute Drill(135°)
OS32693	3	10	60	6	2-Flute Drill(135°)
OS32694	3.5	12	60	6	2-Flute Drill(135°)
OS32695	4	16	60	6	2-Flute Drill(135°)
OS32696	4.5	16	60	6	2-Flute Drill(135°)
OS32697	5	19	60	6	2-Flute Drill(135°)
OS32698	6	19	60	6	2-Flute Drill(135°)
OS32699	7	22	65	8	2-Flute Drill(135°)
OS32700	8	26	70	8	2-Flute Drill(135°)
OS32701	9	26	75	10	2-Flute Drill(135°)
OS32702	10	32	80	10	2-Flute Drill(135°)
OS32703	12	38	90	12	2-Flute Drill(135°)

DIA-TRE

For trimming laminates: Cross flute router
●This is for trimming laminates. The cross-fl ute shape of the cutting edges suppresses the occurrence of burrs.
Tool Material：Carbide

DIA-TRE
TY-Code	Dia. (Dc)	Length of Cut (ℓ)	Overall Length (L)	Shank (Ds)
OS32673	1.5	3	45	4
OS32674	1.8	3.6	45	4
OS32675	2	4	45	4
OS32676	2.5	5	45	4
OS32677	3	6	45	4

DIA-TRE-D

For trimming laminates: Cross flute router
●This is for trimming laminates. The end cutting teeth are designed as a drill to perform plunging and repeated side thrust machining.
Tool Material：Carbide

DIA-TRE-D
TY-Code	Dia. (Dc)	Length of Cut (ℓ)	Overall Length (L)	Shank (Ds)	End cutting teeth
OS32668	1.5	3	45	4	2-Flute Drill(135°)
OS32669	1.8	3.6	45	4	2-Flute Drill(135°)
OS32670	2	4	45	4	2-Flute Drill(135°)
OS32671	2.5	5	45	4	2-Flute Drill(135°)
OS32672	3	6	45	4	2-Flute Drill(135°)

DIA-MFC

Multi-flute finishing router
●Can be used for the general fi nishing of a wide variety of composite materials.
Tool Material：Carbide

DIA-MFC
TY-Code	Dia. (Dc)	Length of Cut (ℓ)	Overall Length (L)	Shank (Ds)
OS32649	4	12	62	4
OS32650	6	18	68	6
OS32651	8	24	74	8
OS32652	10	30	80	10
OS32653	12	36	86	12

DIA-MRC

General purpose routers: with corner radius
●Ideal for a wide variety of machining in a wide variety of polymer-base, metal-base, and ceramic-base composite materials. The end cutting teeth have corner radius, and a large range of radius sizes are available.
Tool Material：Carbide

DIA-MRC
TY-Code	Dia. (Dc)	Length of Cut (ℓ)	Overall Length (L)	Shank (Ds)	End cutting teeth	Flute
OS32654	4	12	62	4	4	4
OS32655	4	12	62	4	4	4
OS32656	6	18	68	6	4	4
OS32657	6	18	68	6	4	4
OS32658	6	18	68	6	4	4
OS32659	8	24	74	8	4	4
OS32660	8	24	74	8	4	4
OS32661	8	24	74	8	4	4
OS32662	10	30	80	10	4	4
OS32663	10	30	80	10	4	4
OS32664	10	30	80	10	4	4
OS32665	12	36	86	12	4	4
OS32666	12	36	86	12	4	4
OS32667	12	36	86	12	4	4

ED-EM

Electric deposition diamond router
●For machining composite brittle material (machinable ceramics).
Steel body + Electric Tool Material：deposition diamond

ED-EM
TY-Code	Dia. (Dc)	Length of Cut (ℓ)	Overall Length (L)	Shank (Ds)	Granularity
OS32644	4	12	57	4	#60
OS32645	6	18	63	6	#60
OS32646	8	24	70	8	#60
OS32647	10	30	75	10	#60
OS32648	12	36	81	12	#60

ED-DS

Electroplated Diamond Drills
●For machining ceramics base composite materials and brittle material (machinable ceramics).
For machining ceramics base composite materials and brittle material

ED-DS
TY-Code	Dia. (Dc)	Flute Length (ℓ)	Overall Length (L)	Shank (Ds)	Under Neck Length (ℓn)	Neck Dia. (d2)	Length of Electroplating
OS24325	2	7	39	3	8.5	1.6	8.5
OS24326	2.5	9	41	3	10.5	2.1	10.5
OS24327	3	11	43	3	12.5	2.6	12.5
OS24328	3.5	15	47	4	16.5	3.1	10
OS24329	4	17	49	4	18.5	3.6	10
OS24330	4.5	19	63	6	21	4.1	10
OS24331	5	21	65	6	23	4.6	10
OS24332	5.5	23	67	6	25	5.1	10
OS24333	6	25	69	6	27.4	5.6	10
OS24334	6.5	28	72	8	30	6.1	10
OS24335	7	28	72	8	30	6.6	10
OS24336	7.5	31	75	8	33	7.1	10
OS24337	8	34	78	8	36.4	7.6	10
OS24338	8.5	34	84	10	36	8.1	10
OS24339	9	37	87	10	39	8.6	10
OS24340	9.5	37	87	10	39	9.1	10
OS24341	10	40	90	10	42.4	9.6	10
OS24342	10.5	40	97	12	42	10.1	10
OS24343	11	40	97	12	42	10.6	10
OS24344	11.5	44	101	12	46	11.1	10
OS24345	12	44	101	12	46.4	11.6	10
OS24346	12.5	48	105	12	51	12.1	10
OS24347	13	48	105	12	51	12.6	10

LinkIcon OSG CORPORATION

●NACHI：Crystal Dia Coated Drills for CFRP
●栄工舎：Carbide Solid Cutter For Fiber
●ダイジェット工業：Diamond Solid Carbide Drill

OSG

●Phoenix Exchangeable Head Drill
・PXD
●NC PLANET CUTTER
・WX-PNC, WH-VM-PNC,
●A-TAP Series
・A-POT, A-SFT,
●Silent Roughing End Mill Series
・SI-○○-RESF
●WD Carbide Drill
・WD-2D, 4D
●End Mill for Counterboring Series
・DIA-BNC/DIA-HBC4
●Micro-Revolution Small Carbide Drills for Stainless Steels
・MRS-GDL
●V-Cut End Mill with DIA Coated
・DIA-VCM
●Counterboring for Aluminum
・CA-ZDS
●Drill & Tap Series
・WH
●WX ULTRA SMALL SIZE CARBIDE DRILL
・WX-MS-GDS
●V-Cut End Mill stub
・V-XPM-VCMS
●CBN End Mill Series
・CBN-○○○
●Extra Small-Diameter Carbide Drill Series
・UVM-DRL
●Spiral tap for Stainless steels
・CC-SUS-SFT
●X Performer Forming Taps Series
・S-XPF
●HSS Extra-Long Drill
・TDXL
●Carbide Mega Muscle Drills
・TRS-HO-○D
●HSS NEXUS DRILL
・NEXUS
●Variable-Lead End Mill NEO Series
・NEO-○○○
●DG Coated End Mill Series
・DG-○○○
●End Mill for Counterboring Series
・ZDS
●WH Roughing End Mill Series
・WH

HITACHI TOOL

●Epoch Quattro High Hard Ball
・EHHB-ATH
●Epoch Radius
・EPDRF4-TH
●Epoch SUS Series
●EPDBE/EPDSE
●Epoch Thread Mill Series
・ET-PN/EDT-TH
●Z Plunging Borer
・ZPB-TH
●Epoch Micro Non Step Borer
・EMSBS-TH
●Epoch G Turbo End Mill
・HGOF2(4)-TH
●Carbide Non Step Borer
・○○WHNSB-TH
●Epoch PaNacea Series
・HGOS-PN/HGOB-PN
●Epoch Super Hard Tap
・ESHT○-TH
●Epoch MIRUS Series
・EMX○4-TH
●Epoch CBN End Mill
・CBN-EPS○
●Carbide Oil Hole Non Step Borer for Cast Iron
・○○FWHNSB-TH

NACHI

●AQUA Drill EX Flat Radius
・AQDEXZ-R
●AQUA Drill EX Starting
・AQDEXST
●AQUA Drill EX Oil-Hole Long
・AQDEXOH
●Crystal Diamond Coated Fiber Mill
・DCECFF
●AQUA Drill EX VF
・AQDEXVF
●AQUA Drill EX Oil-Hole 3-Flute
・AQDEXOH3F
●Palabolic Flute Drill Series for Aluminum
●SG-ESR Drill
・SGESR
●GSX MILL VL Series
（Multiple Flute）
・GSX MILL VL
●AQUA Drill EX Flat Series
・AQDEXZ
●SG-Flat Drill
・SGEZ
●GSX Mill Ball Type
・GSXB2
●Crystal DIA Coated Drill for CFRP
・DCDCF
●AQUA Drill Series
・AQD3F
・AQDED3F
・AQDEXRN
・AQDEX...
●AG Drill Series
・AGES/ESS
・AG-ESSL
・AGSTD
●GSX MILL Series
・GSX MILL

NS TOOL

●PCD Radius End Mill
●Ball End Mill for Hard Brittle Materials
●End Mill for Aluminum
●Ball End Mill for Hard Brittle Materials
●End Mill for Aluminum
●CBN Super Spairal Ball End Mill
・SSPB220
●M-Thread Mill
・MMTM
●MUGEN PREMIUM Lead End Mill
・MXH
●PCD Square End Mill
・PCDSE
●CBN Square End Mill
・SSE400/SSE600
●3-Flute Long Taper Neck Ball End Mill
・MRBTNH345
●End Mill for Hard Brittle Materials
・DCMS
●Micro Thread Cutting Tool
・MMTS
●Short Flute End Mill for Resin
・RSE230/RSB230
●Long Neck Radius End Mill
・MHR230R
●Power Radius End Mill
・MSXH440R
●CBN Radius End Mill
・SSR200
●End Mill for Aluminum
・ALB225
●Diamond Coating End Mill
・DCRB230
・DCHR230
・DCSE235
●MUGEN-COATING Miniature Drill
・MDR-R(PD)

DIJET

●EZ Drills for Heat Resistant Alloys
・EZSM
●Solid Carbide radius End Mill for Heat Resistant Alloys
・DV-OCSAR形
●Solid Carbide End Mill for Heat Resistant Alloys
・DV-SCMS形
●Modular Head
・Qm MAX-MQX形
●Solid End Mill
・SEM形
●Diamond Solid Carbide Drill
・VN-DTD,VN-DRD
●Modular Head（S-Head）
・SMSA形
●Modular Head（Qm Mill）
・MPM形
●3-Flute Super One-Cut End Mill
・DV-SOCS3